Rain Cloud Glow in the Dark Embroidered Patch Iron On or Sticker Backed
👁️🌧️
Glows in the dark ✨
Your choice of an Iron On or Sticker Backing
Approximate Dimensions: 2” x 2.30”
Sticker back adhesive is very strong and durable. The perfect addition to your notebook, storage case, wall, any surface you’d think to put a sticker.
✨Sticker backing is not weatherproof, so please be aware it may not last as long where water/moisture may be✨
_________________________________________________
Directions(Ironing on cotton fabrics):
•Place material, adhesive side down , on top of project. Press and hold iron for 8 seconds on each section until entire piece is bonded.
• If needed, place and hold the iron on the area for 2 seconds. Repeat until surface is bonded. Allow to cool.
Light Fabrics: Only apply heat for 6 seconds.
Thick Fabrics: Apply heat an additional 2 seconds from the back of the project.
I personally make every patch so they are truly one of a kind. I hope you'll enjoy them as much as I enjoy making them.
-Michele
Original artwork designed by Michele Ambra
👁️🌧️
Glows in the dark ✨
Your choice of an Iron On or Sticker Backing
Approximate Dimensions: 2” x 2.30”
Sticker back adhesive is very strong and durable. The perfect addition to your notebook, storage case, wall, any surface you’d think to put a sticker.
✨Sticker backing is not weatherproof, so please be aware it may not last as long where water/moisture may be✨
_________________________________________________
Directions(Ironing on cotton fabrics):
•Place material, adhesive side down , on top of project. Press and hold iron for 8 seconds on each section until entire piece is bonded.
• If needed, place and hold the iron on the area for 2 seconds. Repeat until surface is bonded. Allow to cool.
Light Fabrics: Only apply heat for 6 seconds.
Thick Fabrics: Apply heat an additional 2 seconds from the back of the project.
I personally make every patch so they are truly one of a kind. I hope you'll enjoy them as much as I enjoy making them.
-Michele
Original artwork designed by Michele Ambra
👁️🌧️
Glows in the dark ✨
Your choice of an Iron On or Sticker Backing
Approximate Dimensions: 2” x 2.30”
Sticker back adhesive is very strong and durable. The perfect addition to your notebook, storage case, wall, any surface you’d think to put a sticker.
✨Sticker backing is not weatherproof, so please be aware it may not last as long where water/moisture may be✨
_________________________________________________
Directions(Ironing on cotton fabrics):
•Place material, adhesive side down , on top of project. Press and hold iron for 8 seconds on each section until entire piece is bonded.
• If needed, place and hold the iron on the area for 2 seconds. Repeat until surface is bonded. Allow to cool.
Light Fabrics: Only apply heat for 6 seconds.
Thick Fabrics: Apply heat an additional 2 seconds from the back of the project.
I personally make every patch so they are truly one of a kind. I hope you'll enjoy them as much as I enjoy making them.
-Michele
Original artwork designed by Michele Ambra
